Merchandise Description
KY-200KYG Air Compressor (can be personalized) :
Basic Attributes:
Permanent magnet inverter compressor because of its energy saving and high efficiency has become a hot and bright spot of the industry, the original air compressor energy consumption on the market, is gradually being the permanent magnet inverter compressor to replace or substitute, users can directly bring cost saveing of 20%-40%.
With the development of science and technology, air compressor is widely used in many industries such as machinery, metallurgy, building resources, electric power, chemical industry, food, textile and so on. However, the air compressor belongs to the high energy consumption equipment, power consumption in some industries accounted for more than 30% og the power consumption of production, it is commonly known as “electric tiger”.
Specific Attributes:
one,AIR Stress STABILLTY
Due to the use of screw air compressor variable frequency stepless speed regulation characteristics of inverter, inverter controller or regulator through internal PID, can smoothly start on consumption volatility is relatively large occasions, and can quicklyh adjust the response. Compared with the upper and lower limit switch control of the power frequency operation, the air pressure stability increases exponentially.
two,START NO IMPACT
Because the transducer itself contained the function of soft starter, starting current within the maximum rated current of 1.2 times, compared with the start frequency in general more than 6 times the rated current, start a little impact.
This impact is not only on the grid, the influence of the entire mechanical system, but also significantly lowered.
3,VARIABLE FLOW CONTROL
Power driven air compressor can only work in an exhaust, inverter air compressor can work in a wide range of exhaust. Frequency converter is based on the actual use of gas in real time to adjust the motor speed to control the amount of exhaust.
When the air volume is low, the air compressor can be automatically dormant. thereby greatly redcing the energy loss. The optimized control strategy can further improve the energy saving effect.
four,AC POWER SUPPLY VOLTAGE BETTER
Because of the over modulation technology of the inverter, the output voltage of the motor can be output when the voltage of the AC power supply is low, and the voltage of the output to the motor is too high.
For the era of power, frequeucy conversion drive can show its advantages.
five,AC POWER SUPPLY VOLTAGE BETTER
Most of the working condition of the frequency conersion system is lower than the rated speed of the work, the host machine noise and wear down, prolongmain- tenance and service life.
If the admirer is also driven by frequency conversion, can drastically minimize the nosie of air compressor perform.
Technological PARAMETERS:
Power-SAVING EFFECT OF TWO-STAGE COMPRESSION:
In accordance to the engineering thermodynamics principle, it is the most inexpensive for the compressor with isothermal compres-
sion.Two-stage oil-injection screw air compressor is designed based on the above theory, it fully improves the cooling function through oil injection during the two-stage compression, plus the inter-stage cooling, by ensuring the temperature is above the pressure dew point, it can be close to isothermal compression as possible, so as to achieve the energy-saving effect.
At the same time, due to low compression ratio of the two-stage airend, the “internal leakage”is largely reduced in the compression process compared with the single-stage compression airend with the same power and same discharge pressure.On the contrary, the diplacement is increased, which means that the efficiency is increased, and the specific power is reduced.
Compared with the ordinary two-stage permanent magnetic compressor on the market,Moair uses the two-drive and two-stage compres- sion, which directly avoids the power loss inside the gear set.
Strength-preserving advantages:
one,To minimize the bearing load, and enhance the volumetric efficincy
two,In the circumstance of partial load operation, it can improve efficiency and turn into energy preserving to a better extent.
three,The energy saving of two-stage screw air compressor is up to 15%-twenty five% than that of the one-stage air compressor, which can save the considerable electricity fees every year.
About shipping
Company data
Why choose us?
Certification
FAQ:
one.Q:What do you need machine and quotation?
A: According to capacity and factory size ,we can give you details.
two.Q: Are you investing firm or company ?
A:We are manufacturing facility.
three.Q:How do we pack machine?
A:Exporting wooden cases
4.Q:Lead time
A:Around 25-30 days after the receipt of your deposit.
How to Choose the Correct Air Compressor
An air compressor utilizes pressurized air to electrical power a variety of instruments. They are most commonly utilised to energy nailers and influence wrenches. Other common uses for air compressors incorporate paint sprayers and effect wrenches. Even though all air compressors have the same simple building, their specialty differs. Ultimately, their variations appear down to the volume of air they can push. Study on for details on each kind of air compressor. These instruments are fantastic for several diverse reasons, and selecting the correct air compressor relies upon on your distinct wants.
Electric motor
While purchasing an electrical motor for air compressor, compatibility is a essential element. Not all motors function with the identical type of air compressor, so it’s critical to examine the manufacturer’s recommendations ahead of acquiring. By carrying out this, you can stay away from losing money on an incompatible motor. Another essential consideration is speed. A motor’s speed is its fee of rotation, measured in revolutions per moment. It is critical that you buy a motor with sufficient velocity to meet up with the requirements of your air compressor.
Normally, an electric motor for air compressor is 1.5 hp. It is excellent for use with health-related gear and metal-slicing equipment. It also performs properly under constant operation and delivers a large efficiency and vitality-preserving performance. Furthermore, it functions an desirable cost, creating it a great choice for a broad variety of programs. If you are looking for a motor for an air compressor, search no even more than a ZYS collection.
A motor’s safety class implies how the motor will run. Protection lessons are specified by the IEC 60034-5. These are said with two digits and depict the defense in opposition to solid objects and water. For illustration, an IP23 ranking indicates that the motor will be safeguarded from reliable objects, even though IP54 implies that it will protect from dust and h2o sprayed from all instructions. It is vital to choose a motor with the proper defense class for your air compressor.
When selecting an electrical motor, you need to take into account regardless of whether it is suitable with the model of air compressor. Some may be suitable, whilst other folks may call for advanced electronics skills to mend. Nevertheless, most air compressors are coated by guarantee, so it really is crucial to check out with the company if the guarantee is nevertheless in result just before you spend a dime on a alternative. The motor must be replaced if it has failed to execute as created.
Oil bath
Air compressors demand proper lubrication to perform efficiently. The piston should draw air with small friction. Dependent on their design, air compressors can both be oil-lubricated or oil-totally free. The previous employs oil to lessen piston friction, while the latter splashes it on the cylinder bearings and partitions. This sort of air compressors are typically acknowledged as oil-flooded air compressors. In buy to maintain their oil baths cleanse, they are advised for use in locations with higher dust stages.
Start/cease handle
An air compressor can be managed by a commence/quit handle. This kind of manage sends a sign to the primary motor that activates the compressor when the desire for air falls under a preset limit. This management approach is successful for more compact air compressors and can be beneficial for decreasing power charges. Begin/end handle is most powerful in programs in which air pressure does not adjust usually and exactly where the compressor is not required to operate repeatedly.
To troubleshoot this dilemma, you need to verify the electrical power source of your compressor. To check the offer facet, use a voltage keep track of to figure out if electrical power is flowing to the compressor. Make certain that the energy provide to the compressor is constant and steady at all instances. If it fluctuates, the compressor may possibly not start or quit as anticipated. If you are not able to uncover the problem with the air compressor energy source, it may possibly be time to exchange it.
In addition to the start/quit handle, you may possibly want to acquire further air receivers for your air compressor. These can increase the potential of air saved and minimize the amount of moments it begins and stops. One more way to reduce the quantity of begins for every hour is to incorporate more air receivers. Then, you can change the control to match your demands. You can also put in a strain gauge that screens the compressor’s performance.
Start/end handle for air compressors can be intricate, but the standard factors are relatively effortless to realize. One particular way to check them is to switch the compressor on or off. It is typically found on the exterior of the motor. If you happen to be doubtful of the location of these elements, check out the capacitors and make sure that the air compressor is not operating whilst you happen to be not using it. If it does, try out to get rid of the capacitor.
Variable displacement control is another way to alter the volume of air flowing into the compressor. By managing the volume of air, the management can hold off the use of added compressors until finally a lot more essential air is available. In addition to this, the system can also keep an eye on the power utilised in the compressor. This control method can consequence in sizeable strength personal savings. You can even help save on the amount of electricity by utilizing variable displacement manage. It is essential for efficient compressed air programs.
Variable velocity push
A VFD, or variable frequency travel, is a kind of electric motor that adjusts its velocity to match the need for air. It is an productive way to lessen power charges and enhance technique reliability. In reality, research have demonstrated that a twenty% reduction in motor pace can preserve up to fifty% of power. In addition, a VFD can keep an eye on added variables this kind of as compressor oil strain and motor temperature. By eliminating handbook checks, a VFD will improve the overall performance of the software and minimize functioning costs.
In addition to decreasing vitality costs, variable-velocity drives also increase productivity. A variable-velocity air compressor reduces the chance of technique leaks by 30 p.c. It also reduces the threat of method leaks by minimizing pressure in the system. Because of these rewards, many governments are selling this technological innovation in their industries. A lot of even supply incentives to support organizations up grade to variable-speed drives. Consequently, the variable-pace drive can advantage a lot of air compressor installations.
One particular significant advantage of a variable-pace generate is its capacity to enhance strength use. Variable frequency drives are in a position to ramp up and down to match the need for air. The aim is to enhance the stress and movement in the system so that the very best “lifeless band” happens among forty p.c and eighty per cent of complete load. A variable-speed compressor will also boost energy performance simply because of its programmability.
A variable-speed air compressor can also be employed to handle the quantity of air that is compressed by the program. This feature adjusts the frequency of electrical power supplied to the motor primarily based on the desire. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess need for air, the variable-speed compressor will enhance its speed. In addition, this variety of air compressor is a lot more efficient than its fastened-speed counterpart.
A VFD has numerous rewards for compressed air methods. First, it aids stabilize the stress in the pipe community, therefore decreasing the electricity losses owing to upstream stress. It also aids decrease the power consumption brought on by fluctuations in upward force. Its benefits are also far-achieving. And as lengthy as the air force and air provide is properly sized, a VFD will support enhance the efficiency of compressed air systems.
